Hammer Tip Information & Troubleshooting
Disclaimer: The information on this page is provided for general help and informational purposes only. EarthSaver Equipment is not the original equipment manufacturer (OEM), and we are not responsible for the accuracy of this information or for any results from its use. Always follow your OEM's manuals, specifications and safety guidelines.
Grinder Tip Basics
Grinder tips (also called cutter tips, teeth or inserts) are the replaceable wear parts bolted to the hammers of a wood grinder, tub or horizontal. They do the actual cutting and tearing of material, and they are what protects the more expensive hammer and rotor underneath. Most tips are a steel base block with tungsten carbide added to the working surfaces, and most are reversible, so a worn tip can be flipped to use its other side before it is replaced.
There is no single best tip. The right style depends on what you grind, how clean it is, and what end product you need. This page covers the common tip styles and their pros and cons, how to choose, and the problems to watch for.
| Term | What it means |
|---|---|
| Hammer, Hammer Body, Base block | The steel body of the tip that bolts to the hammer. Once wear gets through the carbide, the base block wears much faster. |
| Carbide (grit / overlay) | Tungsten carbide welded onto the working edges. More carbide, and more weld coverage, generally means longer life, at a higher price. |
| Reversible (dual-sided) | Most block-style tips can be flipped once for roughly double the working life, as long as you flip before wear reaches the base block. |
| Primary grind vs. regrind | Primary grind is breaking down raw material such as logs and land clearing debris. Regrind is reprocessing already ground material to a smaller size. |
1. Tip Styles: Pros & Cons
Carbide grinder tips come in several shapes. The two below are the ones we stock most, and the ones most grinder operators will run. Style names vary by manufacturer, so match by shape and application, and confirm fit for your machine before ordering.
| Tip Style | Best For | Pros | Watch Out For |
|---|---|---|---|
| Standard Carbide Block | General grinding: land clearing, pallets, compost, green waste and regrind. Mixed jobs. | The most common, general-purpose style. Works across a wide range of materials and conditions. Reversible, so a worn tip can be flipped for extra life. | A general-purpose tip, so a specialized style can outperform it in one specific material. |
| Ripper (Impact-Resistant) | Large-diameter, hard wood and aggressive primary grinding. | Carbide teeth on a hard, impact-resistant face for aggressive cutting. Long life in clean, large wood. | Hard but brittle. Not intended for use when rock, metal or other contaminants are prevalent. |
Other specialty styles exist, such as wing, narrow block, abrasion-resistant and sharp tips. They are made for specific materials and machines. If you think you need one, call us and we will help you find the right fit.
2. Carbide Coverage Levels
Many manufacturers sell the same tip style with different amounts of carbide. More carbide lasts longer and costs more up front. The levels below are Vermeer's names, which are a good example of how coverage tiers typically work. Other brands name theirs differently.
| Level | Carbide Coverage | Expected Life |
|---|---|---|
| Max (8-sided) | The most carbide of the line. | Longest life |
| Premium (6-sided) | Highest carbide content of the standard grit tips, with extra welds on the ends and a single weld on the sides. | Long life |
| Pro (4-sided) | Welds on both the ends and the sides. | Intermediate / standard life |
| Standard (2*-sided) | An economical choice without side welds. | Moderate life |
3. Choosing the Right Tip
| Your Situation | Tip to Consider | Why |
|---|---|---|
| Varied jobs, or you are not sure | Standard carbide block | The most versatile tip and the usual starting point. |
| Large, hard wood with light contamination | Ripper (impact-resistant) | Hard carbide for aggressive cutting. Keep heavy rock and metal out. |
| Land clearing or C&D with rocks or metal likely | Standard carbide block, mid-level carbide | Premium or max carbide may be knocked out before it wears. |
Other factors to weigh:
- Material and region: tree species, hardness and how much dirt comes in with the wood vary by area.
- Production rate and end product: the tip affects particle size, so match it to your end market.
- Consistency of material: mixed jobs favor a general tip. A steady, defined stream can justify a specialized one.
- Change-out time: a full set can take an hour or two, and larger machines have dozens of bolts, so longer-life tips mean less downtime.
4. Issues to Watch For
| Symptom | Likely Cause | What to Do |
|---|---|---|
| Stringier output, lower production, higher fuel burn | Dull tips. Wear shows on the top corners of the carbide. | Shut down and inspect. Flip or replace tips. |
| Wear showing on the base block | Carbide worn through. The base block wears much faster. | Flip or replace right away and check the hammer and tip mount for damage. |
| Carbide chipping or missing | Rock, metal or other contamination. Brittle styles such as rippers are more at risk. | Clean up the feedstock and consider a standard carbide block or a mid-level carbide coverage. |
| Fast wear in dirt, sand or leaves | Abrasive material. | Inspect and flip more often, and keep as much dirt out of the feed as you can. |
| Loose tips or bolts | Wrong nut, low torque, or a worn hammer face. | Use hardened bolts with locking flange nuts and torque to spec. Recheck after about an hour of grinding. |
| Tip does not seat flat on the hammer | Hammer face worn smaller than the back of the tip. | Rework or replace the hammer before installing new tips. |
| Vibration or rotor imbalance | A missing tip, or uneven wear from one end to the other. | Stop and inspect. Replace tips in matching pairs at opposite ends to keep the drum balanced. |
| Material size changing, or gap to screen growing | Tip wear increases the space between the tips and the screen. | Check the gap regularly and replace worn tips and screens. |
| New tip will not fit your hardware | Some aftermarket tips use a different bolt than the OEM tip or are fastened from the back. | Confirm the bolt and mounting style before ordering. |
5. Installing & Flipping Tips
| Step | What to do |
|---|---|
| 1. Inspect often | Check tips before startup, at midday and after shutdown. In heavy grinding, tips can wear through in about a week, so keep spares on hand. |
| 2. Flip before the base block | Flip a worn tip to its other side before wear reaches the base block. Replace it once both sides are worn. |
| 3. Check the hammer | Make sure the hammer face is flat and at least as large as the back of the tip. |
| 4. Use the right hardware | Use hardened bolts with locking flange nuts. A regular nut can work loose and come off. |
| 5. Torque properly | Use a torque wrench, not an impact, and torque to the value in your manual. Over-torquing can stretch the bolt and cause it to break. |
| 6. Balance the drum | Change the tip on the opposite end at the same time so the rotor stays balanced. |
| 7. Mark and recheck | Mark torqued bolts with a paint marker, then recheck torque after about an hour of grinding. |
6. Preventive Measures & Common Mistakes
| Do | Avoid |
|---|---|
| Inspect tips daily and flip them on time. | Running tips down into the base block or the hammer. |
| Match the tip style and carbide level to the material. | Using premium carbide or ripper tips where rock and metal are common. |
| Keep dirt and rock out of the feed. Shaking material out with an excavator first helps. | Feeding dirty material into tips that are not built for it. |
| Use hardened bolts and locking nuts, torqued to spec. | Reusing worn bolts or using an impact wrench to tighten. |
| Replace tips in balanced pairs and keep spares on hand. | Running with a missing or uneven tip. |